Go to homepage
€0.00*

Rollenführungen: Präzise Linearführungssysteme für anspruchsvolle Anwendungen

Rollenführungen sind unverzichtbare Komponenten in der Lineartechnik und bieten zahlreiche Vorteile für industrielle Anwendungen. Diese robusten Führungssysteme zeichnen sich durch ihre hohe Belastbarkeit, präzise Bewegungsführung und lange Lebensdauer aus.


Rollenführungen finden in verschiedenen Industriezweigen Anwendung, darunter:

  • Verpackungsmaschinen
  • Automatisierungssysteme
  • Maschinenschutztüren
  • Spezial- und Schienenfahrzeuge
  • Medizintechnik
Filter
Bearing Unit 8 D14 e Bearing Unit 8 D14 e
ZI-1640
Bearing Unit 8 D14 e
Linear slides are built up with bearing units. They are used in pairs, 1 piece eccentrically (this is set backlash-free) and opposite 1 piece centrically. To minimise wear, a wiper lubrication system must always be installed on each bearing unit.  

From €38.50*
Bearing Unit 8 D14 z Bearing Unit 8 D14 z
ZI-1635
Bearing Unit 8 D14 z
Linear slides are built up with bearing units. They are used in pairs, 1 piece eccentrically (this is set backlash-free) and opposite 1 piece centrically. To minimise wear, a wiper lubrication system must always be installed on each bearing unit. 

From €34.20*
Bolt 8 D14 e, bright zinc-plated Bolt 8 D14 e, bright zinc-plated
ZI-1675
Bolt 8 D14 e, bright zinc-plated
Bolt for fixing and adjusting the track roller D14 on the eccentric side.  

From €8.50*
Bolt 8 D14 z, bright zinc-plated Bolt 8 D14 z, bright zinc-plated
ZI-1670
Bolt 8 D14 z, bright zinc-plated
Bolt for fastening the track roller D14 on the centric side. 

From €5.10*
Double-Bearing Unit 8 D14 e Double-Bearing Unit 8 D14 e
ZI-1650
Double-Bearing Unit 8 D14 e
Linear slides are built with storage units. They are used in pairs, 1 each eccentric (this is set free of play) and opposite 1 centric. In order to minimize wear, a wiper lubrication system must be installed on every bearing unit.

From €68.50*
Double-Bearing Unit 8 D14 e, stainless Double-Bearing Unit 8 D14 e, stainless
ZI-1652
Double-Bearing Unit 8 D14 e, stainless
Linear slides are built with storage units. They are used in pairs, 1 each eccentric (this is set free of play) and opposite 1 centric. In order to minimize wear, a wiper lubrication system must be installed on every bearing unit.

From €72.50*
Double-Bearing Unit 8 D14 z Double-Bearing Unit 8 D14 z
ZI-1645
Double-Bearing Unit 8 D14 z
Linear slides are built with storage units. They are used in pairs, 1 each eccentric (this is set free of play) and opposite 1 centric. In order to minimize wear, a wiper lubrication system must be installed on every bearing unit.

From €61.20*
Double-Bearing Unit 8 D14 z, stainless Double-Bearing Unit 8 D14 z, stainless
ZI-1647
Double-Bearing Unit 8 D14 z, stainless
Linear slides are built with storage units. They are used in pairs, 1 each eccentric (this is set free of play) and opposite 1 centric. In order to minimize wear, a wiper lubrication system must be installed on every bearing unit.

€72.44*
End Cap and Lubricating System 8 D14, black End Cap and Lubricating System 8 D14, black
ZI-1655
End Cap and Lubricating System 8 D14, black
To minimise wear, a wiper lubrication system should always be fitted to each bearing unit.

From €8.50*
Parabolic Buffer M8 D30x36, black Parabolic Buffer M8 D30x36, black
ZI-2125
Parabolic Buffer M8 D30x36, black
Parabolic springs are used for shock absorption and are available in different sizes.

From €4.64*
Parabolic Buffer M10 D50x58, black Parabolic Buffer M10 D50x58, black
ZI-2133
Parabolic Buffer M10 D50x58, black
Parabolic springs are used for shock absorption and are available in different sizes.

From €9.60*
Parabolic Buffer M12 D75x89, black Parabolic Buffer M12 D75x89, black
ZI-2130
Parabolic Buffer M12 D75x89, black
Parabolic springs are used for shock absorption and are available in different sizes.

From €24.93*
Roller D14 Roller D14
ZI-1665
Roller D14
Precision roller for use in the bearing units 8. 

From €13.10*
Roller D14, stainless Roller D14, stainless
ZI-1666
Roller D14, stainless
Precision roller for use in the bearing units 8. 

From €28.50*
Roller Profile 8 D14, natural Roller Profile 8 D14, natural
PI-1413 SN6000
Roller Profile 8 D14, natural
The track roller profile is used to create bearing units D14 in suitable length up to 6000mm.

€347.00*
Roller Profile 8 D14, natural Roller Profile 8 D14, natural
PI-1413 SZ
Roller Profile 8 D14, natural
The track roller profile is used to create bearing units D14 in suitable length up to 6000mm. Cut to size max. 6000 mmCompatible with item 0.0.426.02

€43.18 / 1000 mm *
Details
Roller Profile 8 D14, natural Roller Profile 8 D14, natural
PI-1430 SN6000
Roller Profile 8 D14, natural
The track roller profile is used to create bearing units D14 in suitable length up to 6000mm.

From €250.98*
Roller Profile 8 D14, natural Roller Profile 8 D14, natural
PI-1430 SZ
Roller Profile 8 D14, natural
The track roller profile is used to create bearing units D14 in suitable length up to 6000mm. Cut to size max. 6000 mmCompatible with item 0.0.426.02

€43.18 / 1000 mm *
Details
Shaft clamp Profile 8 D14, natural Shaft clamp Profile 8 D14, natural
PI-1535 SN3000
Shaft clamp Profile 8 D14, natural
The shaft clamping profile is used to hold the guide shaft d14. The shaft is pressed into the profile groove by pressing in the shaft clamping profile. The shafts are secured by a DIN6325 cylindrical pin.

From €16.10*
Shaft clamp Profile 8 D14, natural Shaft clamp Profile 8 D14, natural
PI-1535 SN6000
Shaft clamp Profile 8 D14, natural
The shaft clamping profile is used to hold the guide shaft d14. The shaft is pressed into the profile groove by pressing in the shaft clamping profile. The shafts are secured by a DIN6325 cylindrical pin.

From €27.36*
Shaft clamp Profile 8 D14, natural Shaft clamp Profile 8 D14, natural
PI-1535 SZ
Shaft clamp Profile 8 D14, natural
The shaft clamping profile is used to hold the guide shaft d14. The shaft is pressed into the profile groove by pressing in the shaft clamping profile. The shafts are secured by a DIN6325 cylindrical pin.

€5.03 / 1000 mm *
Details
Shaft clamp profile 8 D25, natural Shaft clamp profile 8 D25, natural
PI-1537 SN3000
Shaft clamp profile 8 D25, natural
The shaft clamp profile is used to hold the guide shaft d25.The shaft clamp profile is screwed on with S1397 countersunk screws M6x16 DIN 7991 and NI-1040 slot nuts M6, galvanised-8.The holes for the screw connection are 200 mm apart.

€125.00*
Shaft clamp profile D10, natural-8 Shaft clamp profile D10, natural-8
PI-1536 SZ
Shaft clamp profile D10, natural-8
The shaft clamping profile is used to hold the guide shaft d10. The shaft is pressed into the profile groove by pressing in the shaft clamping profile. The shafts are secured by a DIN6325 cylindrical pin. Compatible with item 0.0.442.03

€11.50 / 1000 mm *
Details
Shaft clamp profile D10, natural-8 Shaft clamp profile D10, natural-8
PI-1536 SN3000
Shaft clamp profile D10, natural-8
The shaft clamping profile is used to hold the guide shaft d10. The shaft is pressed into the profile groove by pressing in the shaft clamping profile. The shafts are secured by a DIN6325 cylindrical pin. Compatible with item 0.0.452.23

€34.00*

Eigenschaften und Vorteile von Rollenführungen

  • Hohe Tragfähigkeit: Rollenführungen können schwere Lasten problemlos bewältigen und eignen sich ideal für anspruchsvolle industrielle Umgebungen.
  • Präzise Bewegungsführung: Durch die Verwendung von Rollenketten wird eine gleichmäßige und stabile Bewegung mit minimalen Schwankungen des Verschiebewiderstands erreicht.
  • Schmutzresistenz: Im Vergleich zu Kugelführungen sind Rollenführungen deutlich unempfindlicher gegenüber Verunreinigungen, was sie besonders für raue Umgebungen prädestiniert.
  • Geräuscharme Bewegung: Die Rollenführungen erzeugen nur geringe Geräusche, was zu einer angenehmeren Arbeitsumgebung beiträgt.
  • Wartungsfreundlichkeit: Dank der Verwendung von Rollenketten und optimierter Schmiermittelrückhaltung ermöglichen Rollenführungen einen langfristig wartungsfreien Betrieb.

FAQ: Häufig gestellte Fragen zu Rollenführungen

Hier finden Sie Antworten auf häufig gestellte Fragen zu unseren Rollenführungen.

Was ist der Unterschied zwischen Rollenführungen und Kugelführungen?

Rollenführungen verwenden größere Wälzkörper (Rollen) und sind dadurch robuster gegenüber Schmutz und Ungenauigkeiten. Kugelführungen bieten oft höhere Präzision, sind aber empfindlicher.

Welche Materialien werden für Rollenführungen verwendet?

Rollenführungen bestehen typischerweise aus gehärteten Stahlschienen und Stahlrollen. Für spezielle Anwendungen gibt es auch Ausführungen in Edelstahl oder mit Kunststoffrollen.

Wie werden Rollenführungen geschmiert?

Viele Rollenführungen verfügen über integrierte Schmierstoffreservoirs für eine langanhaltende Schmierung. Zusätzlich können externe Schmiervorrichtungen angebracht werden.

Können Rollenführungen Fehlausrichtungen ausgleichen?

Ja, Rollenführungen können Fehlausrichtungen in der Größenordnung von Millimetern sowohl in Bezug auf Parallelität als auch Ebenheit ausgleichen.

Wie hoch ist die Belastbarkeit von Rollenführungen?

Die Belastbarkeit variiert je nach Modell und Größe. Einige Rollenführungen können Lasten von bis zu 15.000 N pro Läufer tragen.