Sliding-Door Guide Profile 8 40x20, Top, natural
Maunsystem GmbH
3D
Loading...
Product number:
PI-1414 SN6000
Manufacturer:
Maunsystem GmbH
Manufacturer number:
1017741
Length:
6000 mm
Weight:
8.52 kg
Product information "Sliding-Door Guide Profile 8 40x20, Top, natural"
With the sliding door guide profile, sliding doors can be retrofitted in assemblies.
The plastic panel elements are frameless.
The three guide tracks allow for the combination of different doors.
The sliding door guide profile is fastened using Clip St, galvanised-8.
Compatible with item 0.0.623.58
Details
- Baureihe Baureihe 8
- Eigenschaft natur
- ESD ESD-sicher = Ja
- Fläche A = 5,27 cm2
- Flächenträgheitsmoment Torsion It = 0,74 cm4
- Flächenträgheitsmoment um x-Achse Ix = 8 cm4
- Flächenträgheitsmoment um y-Achse Iy = 10,63 cm4
- Gewicht spez. Länge [kg/m] m = 1,42 kg/m
- Liefereinheit 1 Stück à 6000 mm
- Material Al, eloxiert
- Widerstandsmoment um x-Achse Wx = 3,43 cm3
- Widerstandsmoment um y-Achse Wy = 5,32 cm3
| Anodised: | E6EV1 10-15 µm silver |
|---|---|
| Compatible with: | item |
| Delivery unit: | Rods |
| Groove shape: | Slide door profiles |
| Material: | Al Mg Si 0.5 F25, artificially aged |
| Nutauszugskraft: | F=5.000 N |
| Part type : | Schiebetürführungen |
| Profile length: | 6000 mm bar |
| Series: | Series 8 |
| Tolerances: | EN 12020-2 |
PI-1414 SZ
Sliding-Door Guide Profile 8 40x20, Top, natural
With the sliding door guide profile, sliding doors can be retrofitted in assemblies.
The plastic panel elements are frameless.
The three guide tracks allow for the combination of different doors.
The sliding door guide profile is fastened using Clip St, galvanised-8.
ZI-1313
T-Slot Slider 8 80x40
The sliding carriage guide 8 40x80 turns the profile groove 8 into a guide.of a stable sliding carriage element.Sliding elements made of glideable plastic realise a low-wear linearlinear movement, which does not need to be lubricated.The slide body made of high-strength GD-ZN transfers the load force into the profile groove.Attachment elements are screwed to the guide with the enclosed M6 nuts.